Easy operation automatic LCD repair machine Screen Repair tool for cellphone

Specifications

1.automatic LCD touch screen separator
2.perfect machine to repair touch screen
3. Voltage:110v
4.size:L600mm × W400mm × H360mm

Overview:
Use this wonderful machine if you want to separate the LCD from the touch screen on devices, when the LCD is still functioning as it should. No need to purchase the whole assembly anymore if a screen is cracked!
This machine helps with the screen removal process of Samsung Galaxy S2, S3, Note2&3, iPhone 4 4S 5G 5C 5S and many other phone models with screen under 7''. You can used it for separating LCD and touch screen of Apple, Samsung, HTC as well as other cell phones. If the LCD is still working well, you just need to replace a touch screen.

Features:
*  Voltage:110v

*  Size:60CM*40CM*36CM
*  Separate LCD front glass screen
*  Automatic separator hot plate machine
*  Low noise, economical and practical
*  Fast, high efficiency, and easy operation
*  Come with CD which show you how to operate the machine
*  Compatible with:Most smartphone: iPhone 4 4S 5, Samsung, HTC, Sony etc.

Operating Instruction:
1: Turn the power switch on
2: Turn the temperature controller on, and set the temperature. ( usually lower than 100 degree)
3: Put the wire on by the manual mode
4: Adjust steering button
5: Push the, and adjust the motor speed by rotary switch

Note: Adjust the steering button up, the machine will run clockwise; Adjust the steering button up, the machine will run anticlockwise; Middle position will run clockwise and anticlockwise alternatively.

Package Include:
1x 110v Automatic LCD Screen Repair Machine with Power Cable(CD Driver included)        

Step 1:Put your LCD with touch screen on the LCD separator machine, LCD side above.

Step 2:Set the 4 arms to keep the touch screen on the metal plate stably.

Step 3:Turn on the machine and set the temperature about 100 degree.

Step 4: Start to separate the LCD off the glass with a gold cutting wire, then move right and left with the wire between the LCD and the glass.

Step 5:Squeeze some UV glue remover liquid on the LCD and the cellphone glass.

Step 6:Remove the glue with a blade oran eletric hot blade Decal Remover.

Step 7:After the glue is removed,put some UV LOCA glue on the LCD like a "double Y" shape.

Step 8:Put the LCD on the repair gluing mold to hold the LCD.

Step 9:Put a new cellphone glass on the LCD and press it.

Step 10:Put the whole new LCD screen in front of the UV light Ultraviolet lamp and dry the glue about 5 minutes.

Step 11:You finish the whole separating and installing process,you 've done a very good job.